|
| |
|
|
| |
|
|
| |
Dynatex® Products: Complete Catalog |
|
| |
|
|
| |
Dynatex® 4 Minute Epoxy |
Industrial strength two-part epoxy adhesive designed to produce a super bond. Ideal for repairs in the workshop, automobile, garage, industry and household. Excellent adhesion to repair steel, copper, aluminum and most metals, woods and ceramics. A Dynatex Exclusive Product!
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
49407 |
Single Shot Epod 3 Pack - Carded |
|
|
|
|
|
|
| |
|
| |
|
Dynatex® Anaerobic Gasket Maker Red High Stength |
Can replace or be used as a dressing for conventional gaskets. Will not shrink due to solvent evaporation. Eliminates the need to retorque compressible mechanical gaskets. Can be used on vacuum pump flanges, fuel pumps, water pumps, gearbox covers, automotive and truck axle covers. Once cured, has an operating temperature range of -65°F to 300°F
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
49477 |
Red 50ml Tube |
|
|
|
|
|
|
| |
|
| |
|
Dynatex® Anti-Seize & Lubricating Compound |
Prevents carbon fusion and seizure up to 2000°F(1093°C). Protects against corrosion between dissimilar metals. Resists water, salt solution, most shop and automotive fluids. Reduces coefficient of friction by a minimum of 20%. Meets MIL-907 specifications.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
49501 |
1 oz. (28g) Tube Carded |
|
|
|
49550 |
4 oz. (114g) Brush Top Bottle |
|
|
|
49558 |
8 oz. (227g) Brush Top Bottle |
|
|
|
49560 |
16 oz. (454g) Brush Top Bottle |
|
|
|
49576 |
16 oz. Aerosol Can 12 oz. (340g) Net Wt. |
|
|
|
49580 |
42 lb. Pail (5-Gallon) |
|
|
|
49582 |
Copper 8 oz. Brush Top Bottle Contains copper |
|
|
|
49584 |
Nickel 8 oz. Brush Top Bottle Contains no copper |
|
|
|
|
|
|
| |
|
| |
|
Dynatex® Auto Seam Sealant |
Automotive sealant for exterior and interior joints and seams. Smoothes easily, paintable with any type of paint within 60 minutes. Ample time for tooling, solvent not required for smoothing. Will not crack, minimal shrinkage
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
49388 |
11 oz. (312g) Cartridge |
|
|
|
|
|
|
| |
|
| |
|
Dynatex® Battery Terminal Cleaner with Acid Detector |
Works instantly to neutralize, dissolve and remove power robbing corrosion from battery terminals, cable hold downs and boxes. New acid detector formula assures a clean battery (foaming yellow cleaner turns pink upon contact with battery acid). Increases battery life. Use in conjunction with Dynatex Battery Terminal Protector (P/N 49678).
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
49675 |
16 oz. Aerosol Can 15 oz. Net Wt. |
|
|
|
|
|
|
| |
|
| |
|
Dynatex® Battery Terminal Protector |
Surfaces should be cleaned with Dynatex Battery Cleaner (P/N 49675) and allowed to dry, before applying preventive spray. Dynatex Battery Terminal Protector inhibits corrosion for the life of all batteries. Use on battery cable terminals and battery post to prevent interruption of current battery flow.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
49678 |
16 oz. Aerosol Can 11 oz. Net Wt. |
|
|
|
|
|
|
| |
|
| |
|
Dynatex® Belt Dressing |
Stops squeal and protects against belt slippage due to heat, cold, dampness, dust and glazing. Extends belt life by conditioning against drying and cracking. Helps prevent premature wear. Provides better grip and traction. Can be used on fan belts, power steering belts, water pumps and power tools.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
52188 |
16 oz. Aerosol Can 12 oz. Net Wt |
|
|
|
|
|
|
| |
|
| |
|
Dynatex® Black Flexible Rubber Toughened Adhesive |
Dynatex® Rubber Toughened Adhesive is a black medium - high viscosity, rubber-toughened ethyl cyanoacrylate adhesive. Provides superior shock and thermal resistance when bonding rubbers, metals, and plastics in harsh environments
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
42241 |
1 Oz. Bottle |
|
|
|
42241-05 |
1 Oz. Bottle |
|
|
|
42241-10 |
1 Oz. Bottle |
|
|
|
|
|
| |
|
| |
|
Dynatex® Black General Purpose Adhesive |
Dynatex® General Purpose Adhesive is a single component high viscosity cyanoacrylate adhesive with a quicker setting speed than most high viscosity materials. Suitable for all general-purpose bonding.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
42220 |
1 Oz. Bottle |
|
|
|
|
|
| |
|
| |
|
Dynatex® Black General Purpose Gel Adhesive |
Dynatex® General Purpose Gel Adhesive is a single component high viscosity gel cyanoacrylate adhesive with a faster cure time than our standard gel. Ideal for bonding porous materials or when controlling adhesive flow is critical. Offers maximum gap filling and repositioning time.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
42999B |
1 Oz. Bottle |
|
|
|
|
|
| |
|
| |
|
Dynatex® Black RTV Silicone Gasket Maker-L/V |
Formulated for gasket making applications. Sensor safe and manufactured to meet OEM specifications. Makes instant, leak proof gaskets for all engines, drive train equipment and related components. Temperature resistant up to 500°F (260°C). Resist oil, water, anti-freeze and transmission fluid. Cures tough and flexible. Works on all vehicles.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
49200 |
3 oz. (85g) Tube Carded |
|
|
|
49271 |
8 oz. (227g) Automatic Can |
|
|
|
49290 |
11 oz. (312g) Cartridge |
|
|
|
|
|
|
| |
|
| |
|
Dynatex® Blue Medium Strength Thread Locker Gel |
Dynatex Threadlocker Gel Pump outperforms leading gel and stick products in the marketplace! Stays where it is applied and will not run. Easy cleanup. Just wipe Nozzle with clean rag and close cap.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
49446 |
35 ml Pump |
|
|
|
|
|
|
| |
|
| |
|
Dynatex® Blue RTV Silicone Gasket Maker-L/V |
Replaces most cut gaskets. Sensor safe and manufactured to meet OEM specifications. Resist cracking, shrinking and migration caused by thermal expansion. Cures tough and flexible. Temperature resistant up to 500°F (260°C). Resist oil, water, anti-freeze and transmission fluid. For valve covers, oil pans, transmission pans, rear-end housings, timing chain covers, thermostat housings, water pumps and oil pump flanges.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
49203 |
3 oz. (85g) Tube Carded |
|
|
|
49276 |
8 oz. (227g) Automatic Can |
|
|
|
49293 |
11 oz. (312g) Cartridge |
|
|
|
|
|
|
| |
|
| |
|
Dynatex® Boltlocker Blue Medium Strength (Threadlocking) |
Fills gaps up to .006 inches. Apply prior to assembly. Eliminates need for stocking lock nuts and lock washers. Can be removed without special tools.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
49441 |
6ml Tube-Carded |
|
|
|
49442 |
24 ml Bottle-Carded |
|
|
|
49444 |
250ml Bottle |
|
|
|
49440 |
10ml Bottle |
|
|
|
49443 |
50ml Bottle |
|
|
|
|
|
|
| |
|
| |
|
Dynatex® Boltlocker Green Medium Strength (Wicking Style) |
Locks and seals metal threads after assembly and adjustments are complete. Fills gaps up to .005 inches. Migrates into pre-assembled threaded parts. Secures adjustments and set screws.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
49461 |
6ml Tube-Carded |
|
|
|
49462 |
24 ml Bottle-Carded |
|
|
|
49460 |
10ml Bottle |
|
|
|
49463 |
50ml Bottle |
|
|
|
|
|
|
| |
|
| |
|
Dynatex® Boltlocker Primer |
Use in applications where the fast cure of an anaerobic is required. Passive metals and some plated surfaces require priming to trigger cure reaction. Recommended for very dirty or oily surfaces and for use in cold temperatures.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
49674 |
6 oz. Aerosol Can 5.5 oz. Net Wt |
|
|
|
|
|
|
| |
|
| |
|
Dynatex® Boltlocker Red Medium/High Strength
(Medium Visc. 1200 - 2000cp) |
Locks and seals metal threaded assemblies where high strength is required. Fills gaps up to .008 inches. Apply prior to assembly. Protects against thread corrosion.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
9440 |
1 ml Tube |
|
|
|
49451 |
6ml Tube-Carded |
|
|
|
49452 |
24 ml Bottle-Carded |
|
|
|
49454 |
250ml Bottle |
|
|
|
49450 |
10ml Bottle |
|
|
|
49453 |
50ml Bottle |
|
|
|
|
|
|
| |
|
| |
|
Dynatex® Brake & Caliper Lubricant |
Designed to tolerate extremely high temperatures of brake systems. Contains petroleum and is used on metal contact points. Temperature range -55°F to 1600°F. Prevents corrosion and rust, particularly on caliper slide bars.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
49590 |
8 oz. Brush Top Bottle |
|
|
|
|
|
|
| |
|
| |
|
Dynatex® Brake and Parts Cleaner Non-Chlorinated |
Quickly removes grease, oil and brake dust from brake system components. Leaves no residue. Fast acting. Use on drums, rotors, master and wheel cylinders, shoes, and linings, pads, hardware, back plates, linkages and calipers. Safe for use on aluminum. Does not contain chlorinated solvents.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
49665 |
20 oz. Aerosol Can 14 oz. Net Wt. |
|
|
|
49669 |
1-Gallon - 3.8L |
|
|
|
49670 |
5-Gallon - 19L |
|
|
|
49671 |
55-Gallon |
|
|
|
|
|
|
| |
|
| |
|
Dynatex® Brake System Silicone Compound |
Contains no petroleum or by-products and will not attack rubber. An excellent release agent and lubricant for rubber and plastic parts, such as o-rings, valves and plastic gears. Locks out moisture and has excellent wash-away resistance. Unaffected by extreme temperatures from -40°F to 500°F. Extends brake system life and stops disc brake squeal. Prevents drying and cracking. Recommended by major brake installer chains, fleets and brake manufacturers.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
1020 |
6g Pillow Packet |
|
|
|
49578 |
6.0 oz. net Automatic Can |
|
|
|
49593 |
5.3 oz. Tube-Boxed |
|
|
|
|
|
|
| |
|
| |
|
Dynatex® Brush-On Electrical Tape |
Forms a tough, flexible coating that seals out moisture and corrosion. Adheres to metal, rubber, vinyl and plastic. Dries at room temperature in 5 minutes.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
49412 |
Black - 4 oz. Brush Top Can |
|
|
|
|
|
|
| |
|
| |
|
Dynatex® Carb & Choke Cleaner |
Helps remove varnish, gum, sludge and other deposits in minutes. Improves performance. Use on carburetors, automatic chokes, PCV systems and heat risers. VOC-Compliant. Contains no CFCs. Oxygen sensor safe.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
52105 |
16 oz. Aerosol Can 12 oz. Net Wt. |
|
|
|
|
|
|
| |
|
| |
|
Dynatex® Clear Fast Setting Gel Adhesive |
Dynatex® Fast Setting Gel Adhesive is a single component high viscosity gel cyanoacrylate adhesive with a faster cure time than our standard gel. Ideal for bonding porous materials or when controlling adhesive flow is critical. Offers maximum gap filling and repositioning time.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
42996 |
1 Oz. Bottle |
|
|
|
|
|
| |
|
| |
|
Dynatex® Clear Fast Setting Rubber Bonder |
Dynatex® Fast Setting Rubber Bonder is a single component medium viscosity cyanoacrylate adhesive. Fast setting and ideal for rubber and plastic bonding applications.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
42028 |
1 Oz. Bottle |
|
|
|
|
|
| |
|
| |
|
Dynatex® Clear Fast Setting Rubber Bonder |
Dynatex® Fast Setting Rubber Bonder is a single component low viscosity Cyanoacrylate adhesive. It is a fast setting adhesive specifically formulated for bonding rubber.
ORDER INFORMATION |
Part # |
Size/
Packaging |
Units per case |
MSDS |
Info |
42006 |
1 Oz. Bottle |
|
|
| | | |
