Can replace or be used as a dressing for conventional gaskets. Will not shrink due to solvent evaporation. Eliminates the need to retorque compressible mechanical gaskets. Can be used on vacuum pump flanges, fuel pumps, water pumps, gearbox covers, automotive and truck axle covers. Once cured, has an operating temperature range of -65°F to 300°

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49477	Red 50ml Tube	10

Prevents carbon fusion and seizure up to 2000 °F(1093 °C). Protects against corrosion between dissimilar metals. Resists water, salt solution, most shop and automotive fluids. Reduces coefficient of friction by a minimum of 20%.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49582	Copper 8 oz. Brush Top Bottle Contains copper	12
49584	Nickel 8 oz. Brush Top Bottle Contains no copper	12
49556	6.75 FL Oz. Automatic Can with Brush Applicator	6

Prevents carbon fusion and seizure up to 2000 °F(1093 °C). Protects against corrosion between dissimilar metals. Resists water, salt solution, most shop and automotive fluids. Reduces coefficient of friction by a minimum of 20%.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49558	8 oz. (227g) Brush Top Bottle	12
49560	16 oz. (454g) Brush Top Bottle	12
49576	16 oz. Aerosol Can 12 oz. (340g) Net Wt.	12

Prevents boot tears, corrosion, arcing and the fusing of spark wires to spark plugs. Maintains its consistency in extreme temperatures from -40°F to 400°F. Resists moisture, acids and alkalines. Moisture proof seal for automotive, marine and other ignition and electrical systems. For distributor caps, battery cables, posts and terminals, light bulb sockets, trailer hitch and all other types of electrical connectors. Complies with FDA Regulation 21 CFR178.3570.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49636	2gm Pouches 200 Piece Jar	1
49633	8 oz. Brush Top Bottle	12
49635	5 Oz. Tube - Boxed	12

A grease-like silicone material, heavily filled with heat conductive metal oxides. Used as a heat transfer medium in electrical and electronic applications for facilitating heat dissipation. Withstands high and low temperatures (-65°F to 400°F), water resistant chemically inactive and hydrolytically stable. Has also been found useful on thermocouple and thermometer wells, mounting semi-conductor devices and thermal joints. NLGI No. 2.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49643	5 oz. (142g) Tube-Boxed	12

Anaerobic sealant chemically cures in the absence of air. Locks and seals threaded fittings. Lubricates and resists corrosion. Prevents leakage and loosening from vibration and moisture in hydraulic, pneumatic, steam and process piping. Allows final adjustment up to 24 hours after application. Instant sealing to 10,000 psi.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49486	50ml Tube	6

Eliminates press and slip fits. Replaces splines and keys. Returns worn, out-of-tolerance assemblies to fit. Locks and seals studs, shafts, and bearings. Fills gaps up to .006 inches.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49472	24 ml Bottle-Carded	6
49474	250ml Bottle	4

Designed to bond cylindrical parts and augment press fits. Works well with hydraulic and pneumatic systems.

High strength and high viscosity for threadlocking and retaining cylindrical assemblies. Augments shrink and press fits in demanding vibrational and high frictional applications. Excellent bonding versatility on worn housings and shafts to enhance the installation of replacement bearings.

Fills gaps up to .006 inches. Apply prior to assembly. Eliminates need for stocking lock nuts and lock washers. Can be removed without special tools.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49441	6ml Tube-Carded	6
49442	24 ml Bottle-Carded	6
49444	250ml Bottle	4
49440	10ml Bottle	20
49443	50ml Bottle	10

Locks and seals metal threaded assemblies where high strength is required. Fills gaps up to .008 inches. Apply prior to assembly. Protects against thread corrosion.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49451	6ml Tube-Carded	6
49452	24 ml Bottle-Carded	6
49454	250ml Bottle	4
49450	10ml Bottle	20
49453	50ml Bottle	10

Locks and seals metal threads after assembly and adjustments are complete. Fills gaps up to .005 inches. Migrates into pre-assembled threaded parts. Secures adjustments and set screws.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49460	10ml Bottle	20
49463	50ml Bottle	10

Locks and seals metal threaded assemblies where high strength is required. Fills gaps up to .008 inches. Apply prior to assembly. Protects against thread corrosion.

Locks and seals metal threaded assemblies where high strength is required. Fills gaps up to .008 inches. Apply prior to assembly. Protects against thread corrosion.

Designed for low strength threadlocking applications where easy removal is required. On set screws, seals threads to prevent corrosion between the threads. Used to tamper-proof threaded fastener assemblies. Prevents loosening of fasteners when subjected to vibration. Use on 1/4 inch or smaller diameter screws.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49482	24ml Bottle	6

Dynatex Threadlocker Gel Pump outperforms leading gel and stick products in the marketplace! Stays where it is applied and will not run. Easy cleanup. Just wipe Nozzle with clean rag and close cap.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49456	35ml Pump	6

Dynatex Threadlocker Gel Pump outperforms leading gel and stick products in the marketplace! Stays where it is applied and will not run. Easy cleanup. Just wipe Nozzle with clean rag and close cap.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49446	35 ml Pump	6

Dynatex Retaining Compound is a single component anaerobic adhesive offering high strength and high viscosity for thread locking and retaining cylindrical assemblies. It is used to augment shrink and press fit in demanding vibration and high frictional applications. Excellent bonding versatility on worn housings and shafts to enhance the installation of replacement bearings. Loctite® 680 Functional Equivalent.

Dynatex® Hydraulic/Pneumatic Sealant is a single component anaerobic adhesive designed for locking and sealing of metal pipes and fittings. The product cures between close fitting metal parts where there is an absence of air. It is specially formulated to be used for all types of straight metal threads where high-pressure sealing is required. This product is formulated to offer lubricity for easy assembly.

Use in applications where the fast cure of an anaerobic is required. Passive metals and some plated surfaces require priming to trigger cure reaction. Recommended for very dirty or oily surfaces and for use in cold temperatures.

ORDER INFORMATION
Part #	Size/ Packaging	Units per case	MSDS	Info
49674	6 oz. Aerosol Can 5.5 oz. Net Wt	6